Infiniti G37 2009-2013 Fuel System Bolt Torque Specifications & Line Fittings
Infiniti G37 2009-2013

Infiniti G37 2009-2013 Fuel System Bolt Torque Specifications

Detailed torque specifications for the fuel system bolts on the 2009-2013 Infiniti G37, including fuel rail, fuel line, and fuel pump components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Fuel Rail System

The fuel rail system delivers fuel to the injectors and ensures proper fuel pressure. Components include the fuel rail, injectors, and associated mounting hardware.

1

Fuel Rail Bolts

M6 x 1.0
Torque Value
9 ft-lbs (12 N·m)
Important Notes
Ensure even tightening in a crisscross pattern to avoid warping the fuel rail.
2

Fuel Injector Bolts

M6 x 1.0
Torque Value
9 ft-lbs (12 N·m)
Important Notes
Ensure injectors are properly seated before tightening.

Fuel Pump System

The fuel pump system includes the fuel pump, sender unit, and mounting hardware. Proper torque ensures secure mounting and prevents fuel leaks.

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Value
19 ft-lbs (26 N·m)
Important Notes
Ensure the fuel pump gasket is properly seated before tightening.
2

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Value
19 ft-lbs (26 N·m)
Important Notes
Estimated value based on similar components. Ensure proper sealing of the sender unit.

Fuel Tank System

The fuel tank system includes the fuel tank, straps, filler neck, and associated hardware. Proper torque ensures secure mounting and prevents fuel leaks.

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Value
32 ft-lbs (43 N·m)
Important Notes
Ensure straps are evenly tightened to avoid stressing the fuel tank.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Value
7.5 ft-lbs (10 N·m)
Important Notes
Converted from inch-lbs to ft-lbs. Ensure proper sealing of the filler neck.

Fuel Filter System

The fuel filter system ensures clean fuel delivery to the engine. Proper torque ensures secure mounting and prevents leaks.

1

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Value
26 ft-lbs (35 N·m)
Important Notes
Ensure the filter is properly aligned before tightening.

Fuel Pressure Regulation

The fuel pressure regulation system includes the pressure regulator and return line. Proper torque ensures secure connections and prevents leaks.

1

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Value
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensure proper sealing of the regulator.
2

Fuel Return Line Bolts

M6 x 1.0
Torque Value
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensure proper sealing of the return line.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the torque specification for the fuel rail bolts on a 2009-2013 Infiniti G37?

The torque specification for the fuel rail bolts on a 2009-2013 Infiniti G37 is 8.7 ft-lbs (12 Nm). Ensure the bolts are tightened evenly to avoid warping the fuel rail or causing leaks.

Q2

Can I reuse the fuel rail bolts after removal?

It is generally recommended to replace the fuel rail bolts after removal, as they are often designed as torque-to-yield bolts. Reusing them may result in improper torque and potential fuel leaks. Always consult the service manual or a professional mechanic for guidance.

Q3

What should I do if I over-torque the fuel rail bolts?

Over-torquing the fuel rail bolts can damage the threads or the fuel rail itself. If this occurs, replace the bolts and inspect the fuel rail for cracks or deformities. If damage is found, replace the fuel rail to prevent fuel leaks, which can be a fire hazard.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool used to apply a specific torque to a fastener, such as fuel system bolts.

  • Adjustable torque settings
  • Calibrated for accuracy
Learn more

Fuel Line Disconnect Tool

A tool designed to safely disconnect fuel lines without damaging the connectors.

  • Compatible with quick-connect fittings
  • Ergonomic design for ease of use
Learn more

Socket Set

A set of sockets in various sizes, including those required for fuel system components.

  • Metric sizes
  • Durable construction
Learn more
Service Procedures

Fuel Rail Bolt Torque Specification Application

Procedure to apply the correct torque to fuel rail bolts on a 2009-2013 Infiniti G37.

  • Disconnect the negative battery terminal to ensure safety.
  • Remove the engine cover to access the fuel rail.
  • Use a fuel line disconnect tool to detach the fuel lines from the fuel rail.
  • Remove the fuel rail bolts using the appropriate socket.
  • Clean the bolt threads and apply a small amount of thread locker if recommended.
  • Reinstall the fuel rail bolts and tighten them to the specified torque of 8.7-10.8 ft-lbs (12-15 Nm).
  • Reconnect the fuel lines and ensure they are securely attached.
  • Reinstall the engine cover and reconnect the negative battery terminal.
View full procedure
Technical Service Bulletins

Fuel System Bolt Torque Specification Update

2011-05-15

Updated torque specifications for fuel system bolts to prevent leaks and ensure proper sealing.

2009-2013 Infiniti G37

Resolution: Apply the updated torque specification of 8.7-10.8 ft-lbs (12-15 Nm) to all fuel rail bolts during service.

Fuel Line Connection Inspection

2012-08-22

Inspection and tightening of fuel line connections to prevent fuel leaks.

2009-2013 Infiniti G37

Resolution: Inspect all fuel line connections and ensure they are properly tightened. Replace any damaged connectors or O-rings.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Infiniti Specs. All rights reserved.

Privacy Policy Terms of Service