Infiniti Q50 2014-present Drivetrain Bolt Torque Specifications
Detailed torque specifications for the drivetrain bolts of the 2014-Present Infiniti Q50, including axle nuts, driveshaft bolts, and differential fasteners.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Engine and transmission mounting
This subsystem includes components that secure the engine and transmission to the vehicle's chassis.
1 Transmission Mounting Bolts
M12 x 1.5
Transmission Mounting Bolts
M12 x 1.5Torque Value
Important Notes
Flywheel and crankshaft
This subsystem includes components that secure the flywheel to the crankshaft.
1 Flywheel Bolts
M14 x 1.5
Flywheel Bolts
M14 x 1.5Torque Value
Important Notes
Transmission oil pan and cooler
This subsystem includes components that secure the oil pan and cooler lines to the transmission.
1 Transmission Oil Pan Bolts
M10 x 1.5
Transmission Oil Pan Bolts
M10 x 1.5Torque Value
Important Notes
2 Transmission Cooler Line Fittings
M12 x 1.5
Transmission Cooler Line Fittings
M12 x 1.5Torque Value
Important Notes
Drive axle and half shaft
This subsystem includes components that secure the drive axle and half shaft to the transmission or differential.
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
Drive Axle/Half Shaft Bolts
M14 x 1.5Torque Value
Important Notes
2 Drive Axle/Half Shaft Nut
M16 x 1.5
Drive Axle/Half Shaft Nut
M16 x 1.5Torque Value
Important Notes
Cv joint and axle shaft
This subsystem includes components that secure the CV joint to the axle shaft.
1 CV Joint/Axle Nut
M18 x 1.5
CV Joint/Axle Nut
M18 x 1.5Torque Value
Important Notes
Differential and transfer case
This subsystem includes components that secure the differential and transfer case.
1 Differential Drain/Fill Plug
M12 x 1.5
Differential Drain/Fill Plug
M12 x 1.5Torque Value
Important Notes
2 Transfer Case Drain/Fill Plug
M12 x 1.5
Transfer Case Drain/Fill Plug
M12 x 1.5Torque Value
Important Notes
Propeller and drive shaft
This subsystem includes components that secure the propeller shaft to the transmission or differential.
1 Propeller/Drive Shaft Bolts
M14 x 1.5
Propeller/Drive Shaft Bolts
M14 x 1.5Torque Value
Important Notes
Engine sensors
This subsystem includes components that secure the engine sensors.
1 Crankshaft Position Sensor Bolt
M8 x 1.25
Crankshaft Position Sensor Bolt
M8 x 1.25Torque Value
Important Notes
2 Camshaft Position Sensor Bolt
M8 x 1.25
Camshaft Position Sensor Bolt
M8 x 1.25Torque Value
Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the torque specification for the driveshaft bolts on a 2014-Present Infiniti Q50?
What is the torque specification for the driveshaft bolts on a 2014-Present Infiniti Q50?
The torque specification for the driveshaft bolts on a 2014-Present Infiniti Q50 is typically 45-55 Nm (33-41 ft-lbs). Always refer to the vehicle's service manual for the exact specifications, as they may vary depending on the drivetrain configuration (e.g., RWD vs. AWD).
Q2 How often should I check the torque on drivetrain components?
How often should I check the torque on drivetrain components?
It is recommended to check the torque on drivetrain components, such as driveshaft bolts and differential mounting bolts, during routine maintenance or after any significant drivetrain work. For example, after replacing a driveshaft or performing suspension modifications, recheck the torque to ensure proper tightness and safety.
Q3 Can I reuse drivetrain bolts, or should they be replaced?
Can I reuse drivetrain bolts, or should they be replaced?
Drivetrain bolts, such as those for the driveshaft or differential, are often designed for single use due to the high stress they endure. Reusing them can lead to failure. Always consult the service manual to determine if the bolts are torque-to-yield (TTY) or reusable. If in doubt, replace them with OEM or equivalent parts.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench
A precision tool for applying accurate torque to drivetrain bolts.
- Adjustable torque settings
- Digital display for precise readings
Breaker Bar
A long-handled tool used to loosen tight bolts before applying torque.
- Durable construction
- Extended leverage for ease of use
Torque Angle Gauge
A tool used to measure the angle of rotation when torque-to-yield bolts are used.
- Accurate angle measurement
- Compatible with most torque wrenches
Service Procedures
Driveshaft Bolt Torque Specification
Procedure for applying the correct torque to driveshaft bolts on the 2014-Present Infiniti Q50.
- Raise the vehicle and secure it on jack stands.
- Locate the driveshaft bolts connecting the transmission to the differential.
- Use a breaker bar to loosen the bolts if necessary.
- Set the digital torque wrench to the specified torque value (refer to the service manual).
- Tighten the bolts in a crisscross pattern to the specified torque.
- Double-check the torque with the torque wrench.
Differential Mount Bolt Torque Specification
Procedure for applying the correct torque to differential mount bolts on the 2014-Present Infiniti Q50.
- Raise the vehicle and secure it on jack stands.
- Locate the differential mount bolts.
- Use a breaker bar to loosen the bolts if necessary.
- Set the digital torque wrench to the specified torque value (refer to the service manual).
- Tighten the bolts in the specified sequence to the specified torque.
- Verify the torque with the torque wrench.
Technical Service Bulletins
Drivetrain Vibration at Highway Speeds
2016-05-15Some 2014-2016 Infiniti Q50 models may experience drivetrain vibrations at highway speeds due to improper torque on driveshaft bolts.
Resolution: Inspect and re-torque the driveshaft bolts to the manufacturer's specifications. Replace any damaged bolts if necessary.
Differential Mount Bolt Loosening
2018-03-22Certain 2014-2018 Infiniti Q50 models may experience loosening of differential mount bolts, leading to noise and vibration.
Resolution: Inspect the differential mount bolts and re-torque them to the specified value. Apply thread locker if recommended by the manufacturer.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.