Infiniti QX80 2014-present 5.6L V8 Engine Bolt Torque Specifications & Fastener Values
Infiniti QX80 2014-present

Infiniti QX80 2014-present 5.6L V8 Engine Bolt Torque Specifications

Comprehensive bolt torque specifications for the 5.6L V8 engine in the 2014-Present Infiniti QX80. Includes detailed torque values for cylinder head bolts, main bearing caps, connecting rod bolts, and more.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Cylinder Head

The cylinder head system includes components that seal the combustion chamber, manage airflow, and house the valvetrain. Proper torque ensures engine integrity and prevents leaks.

1

Cylinder Head Bolts

M10 x 1.5
Important Notes
Follow the manufacturer's specified torque sequence to avoid warping the cylinder head.
2

Valve Cover Bolts

M6 x 1.0
Torque Value
7.25 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

This system includes components that secure the crankshaft and connecting rods, ensuring smooth rotation and proper alignment.

1

Main Bearing Bolts

M12 x 1.75
Torque Value
80 ft-lbs (108 N·m)
Important Notes
Follow the specified torque sequence to ensure even clamping force.
2

Connecting Rod Nuts

M10 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Ensure the connecting rod caps are properly aligned before tightening.

Timing System

The timing system includes components that synchronize the crankshaft and camshaft, ensuring proper engine timing.

1

Timing Chain Tensioner Bolt

M8 x 1.25
Torque Value
33 ft-lbs (45 N·m)
Important Notes
Ensure the tensioner is properly seated before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.75
Torque Value
59 ft-lbs (80 N·m)
Important Notes
Ensure the sprocket is properly aligned with the camshaft before tightening.

Cooling System

The cooling system includes components that manage engine temperature, such as the water pump, thermostat housing, and related bolts.

1

Water Pump Bolts

M8 x 1.25
Torque Value
18 ft-lbs (25 N·m)
Important Notes
Ensure the water pump gasket is properly seated before tightening.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Value
7.2 ft-lbs (9.8 N·m)
Important Notes
Ensure the thermostat housing gasket is properly seated before tightening.

Accessory Drives

This system includes components that drive engine accessories, such as the alternator, power steering pump, and serpentine belt components.

1

Serpentine Belt Tensioner Bolt

M10 x 1.5
Torque Value
18 ft-lbs (25 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Value
33 ft-lbs (45 N·m)
Important Notes
Ensure the alternator is properly aligned before tightening.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for the cylinder head bolts on the 5.6L V8 engine?

The cylinder head bolts on the 5.6L V8 engine should be torqued in three stages: first to 29 lb-ft, then to 58 lb-ft, and finally an additional 90-degree turn. Always follow the manufacturer's sequence to avoid warping or damage to the cylinder head.

Q2

How often should I check the torque on the engine's main components?

It is recommended to check the torque on critical engine components, such as cylinder head bolts, during major maintenance intervals (e.g., every 60,000 miles) or after any engine repair. Always refer to the service manual for specific guidelines.

Q3

Can I reuse the cylinder head bolts on the 5.6L V8 engine?

No, the cylinder head bolts on the 5.6L V8 engine are torque-to-yield (TTY) bolts and should not be reused. They are designed to stretch during installation and must be replaced with new bolts to ensure proper clamping force and prevent leaks.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench

A precision tool for applying accurate torque to engine bolts.

  • Adjustable torque settings
  • Digital display for precise readings
Learn more

Torque Angle Gauge

Used to measure the angle of rotation when applying torque-to-yield bolts.

  • Magnetic base for easy attachment
  • Clear angle markings
Learn more

Engine Bolt Torque Chart

A reference chart specific to the 5.6L V8 engine bolt torque specifications.

  • Includes all critical torque values
  • Organized by bolt type and location
Learn more
Service Procedures

Cylinder Head Bolt Torque Procedure

Step-by-step guide for torquing cylinder head bolts on the 5.6L V8 engine.

  • Clean the bolt threads and bolt holes thoroughly.
  • Apply a small amount of engine oil to the bolt threads.
  • Tighten bolts in the specified sequence to the initial torque value.
  • Use a torque angle gauge to apply the final torque-to-yield angle.
View full procedure

Main Bearing Cap Bolt Torque Procedure

Procedure for torquing main bearing cap bolts on the 5.6L V8 engine.

  • Ensure the bearing caps and engine block are clean and free of debris.
  • Install the main bearing caps in their correct positions.
  • Tighten bolts in the specified sequence to the initial torque value.
  • Apply the final torque-to-yield angle using a torque angle gauge.
View full procedure

Connecting Rod Bolt Torque Procedure

Guide for torquing connecting rod bolts on the 5.6L V8 engine.

  • Lubricate the bolt threads with engine oil.
  • Tighten bolts to the specified initial torque value.
  • Use a torque angle gauge to apply the final torque-to-yield angle.
View full procedure
Technical Service Bulletins

Incorrect Torque Application on Cylinder Head Bolts

2021-05-15

Reports of cylinder head gasket failures due to improper torque application.

2014-2023 Infiniti QX80

Resolution: Follow the updated torque specifications and sequence provided in the service manual.

Main Bearing Cap Bolt Loosening

2020-08-10

Instances of main bearing cap bolts loosening over time.

2014-2023 Infiniti QX80

Resolution: Ensure proper torque application and use a torque angle gauge for final tightening.

Connecting Rod Bolt Failure

2019-03-22

Connecting rod bolt failures reported in some 5.6L V8 engines.

2014-2023 Infiniti QX80

Resolution: Replace connecting rod bolts with updated parts and follow the revised torque procedure.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Infiniti Specs. All rights reserved.

Privacy Policy Terms of Service