Infiniti Vehicle Models M45 2003-2004 Torque Specifications
Infiniti Vehicle Models M45 2003-2004

Infiniti Vehicle Models M45 2003-2004 Torque Specifications

Complete Infiniti Vehicle Models M45 2003-2004 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

4.5l Engine

Torque specifications for 4.5L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m) 2. 28 ft-lbs (38 N·m)
Important Notes
Follow the manufacturer's torque sequence for cylinder head bolts. Ensure the engine is at room temperature before tightening.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Follow the manufacturer's torque sequence for main bearing bolts. Ensure the crankshaft is properly aligned.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
24 ft-lbs (32 N·m)
Important Notes
Ensure the connecting rod bearings are properly seated before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the timing belt/chain is properly tensioned before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
78 ft-lbs (106 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Follow the manufacturer's torque sequence for intake manifold bolts.
2

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the drain plug washer is in good condition before tightening.

4.5l V8 Engine

Torque specifications for 4.5L-V8 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m) 2. 28 ft-lbs (38 N·m)
Important Notes
Follow the manufacturer's torque sequence for cylinder head bolts. Ensure the engine is at room temperature before tightening.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Follow the manufacturer's torque sequence for main bearing bolts. Ensure the crankshaft is properly aligned.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
24 ft-lbs (32 N·m)
Important Notes
Ensure the connecting rod bearings are properly seated before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the timing belt/chain is properly tensioned before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
78 ft-lbs (106 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Follow the manufacturer's torque sequence for intake manifold bolts.
2

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the drain plug washer is in good condition before tightening.

5r05 Transmission

Torque specifications for 5r05 Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
35.5 ft-lbs (48.2 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Transmission Oil System

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
32.5 ft-lbs (44.1 N·m)

Transmission Case and Bellhousing

1

Transmission Case Bolts

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47.4 N·m)
Important Notes
Estimated value based on general industry standards.

Transmission Crossmember and Torque Converter

1

Transmission Crossmember Bolts

M18 x 1.5
Torque Specification
55 ft-lbs (74.6 N·m)
Important Notes
Estimated value based on general industry standards.
2

Torque Converter Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47.4 N·m)
Important Notes
Estimated value based on general industry standards.

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
3

Ball Joint Nut

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
4

Tie Rod End Nut

M10 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
5

Sway Bar Link Nut

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Steering

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
49 ft-lbs (66 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Body and Frame

1

Body Mount Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Door Hinge Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
3

Hood Hinge Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
4

Trunk Lid Hinge Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
5

Bumper Mounting Bolts

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Brakes

Torque specifications for Brakes

Brake Caliper Assembly

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 25-35 ft-lbs (34-47 nm).
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
67 ft-lbs (91 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 61-72 ft-lbs (82-98 nm).

Brake Rotor and Drum Assembly

1

Brake Rotor Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 30-40 ft-lbs (41-54 nm).
2

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 17-22 ft-lbs (23-30 nm).

Wheel and Hub Assembly

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 72-87 ft-lbs (98-118 nm).

Brake Master Cylinder and ABS Assembly

1

Brake Master Cylinder Mounting Bolts

M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 20-25 ft-lbs (27-34 nm).
2

Brake Line Fittings

M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 10-15 ft-lbs (14-20 nm).
3

ABS Sensor Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value based on industry standards. Actual value may vary between 10-15 ft-lbs (14-20 nm).

Drivetrain

Torque specifications for Drivetrain

Engine

1

Flywheel Bolts

M12 x 1.5
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Proper torque is essential to prevent damage to the flywheel, crankshaft, and transmission.
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
68 ft-lbs (92 N·m)
Important Notes
Proper torque ensures the bearings are securely seated and the crankshaft is properly aligned.
3

Connecting Rod Nuts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is crucial to maintain the correct clearance and prevent engine damage.
4

Camshaft Sprocket Bolt

M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Proper torque ensures the sprocket is securely attached and the timing belt or chain is properly tensioned.

Transmission

1

Transmission Pan Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque is essential to prevent leaks and ensure the transmission is properly lubricated.
2

Transfer Case Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transfer case is properly aligned and supported.
3

Drive Shaft Center Bearing Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque is essential to prevent damage to the bearing and drive shaft.

Driveshaft and Axles

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque is essential to prevent damage to the axles, transmission, and differential.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
137 ft-lbs (186 N·m)
Important Notes
Proper torque is crucial to maintain the correct clearance and prevent damage to the CV joint and axle shaft.
3

Axle Shaft Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque is essential to prevent damage to the axle shafts, differential, and transmission.

Differential

1

Differential Drain/Fill Plug

M14 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Proper torque is essential to prevent leaks and ensure the differential is properly lubricated.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure proper alignment of the ignition coil to prevent damage to the spark plug boot.

Starting System

1

Starter Motor Mounting Bolt

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel/flexplate.

Charging System

1

Alternator Mounting Bolt

M8 x 1.25
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Ensure the alternator is properly aligned with the drive belt.

Battery System

1

Battery Terminal Nut

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure a clean and tight connection to prevent voltage drop or arcing.
2

Ground Strap Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar electrical grounding components.

Electrical Control Units

1

ECU/ECM Mounting Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar electronic control unit mounting bolts.
2

Fuse Box Mounting Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar electrical component mounting bolts.

Wiring Harness

1

Wiring Harness Clamp Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar wiring harness clamp bolts.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value based on typical M8 bolt torque for emissions components.
2

EGR Tube Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated value based on typical M8 bolt torque for emissions components.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Torque sequence is critical to ensure even sealing.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Torque sequence is critical to ensure even sealing.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Ensure the exhaust pipe is properly aligned before torquing.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Ensure the catalytic converter is properly aligned before torquing.

Oxygen Sensors

1

Oxygen Sensor (O2 Sensor) Mounting

M12 x 1.25
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value based on typical M12 bolt torque for sensor mounting.

Heat Shields

1

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for heat shields.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Exhaust Support

1

Exhaust Hanger Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value based on typical M6 bolt torque specifications.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor) Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure sensor is properly seated before tightening.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical M6 bolt torque specifications.

Exhaust Flange

1

Exhaust Flange Bolts (Downpipe to Midpipe)

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Fuel

Torque specifications for Fuel

Fuel Rail System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Over-tightening can damage the injector or manifold.

Fuel Pump And Tank

1

Fuel Pump Mounting Bolts

M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the pump is properly seated before tightening.
2

Fuel Tank Strap Bolts

M12 x 1.75
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the tank is properly aligned before tightening.
3

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.

Fuel Lines And Fittings

1

Fuel Line Fittings

M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure fittings are properly aligned before tightening.
2

Fuel Return Line Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on similar M8 bolts in fuel systems.

Fuel Filter And Regulator

1

Fuel Filter Bolt/Nut

M10 x 1.5
Torque Specification
24 ft-lbs (32 N·m)
Important Notes
Ensure the filter is properly seated before tightening.
2

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
33.5 ft-lbs (45.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (30-37 ft-lbs).

Ac Lines

1

A/C Line Fittings

M8 x 1.0
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (20-25 ft-lbs).

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Torque value is the midpoint of the provided range (7-9 ft-lbs).

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Torque value is the midpoint of the provided range (7-9 ft-lbs).

Heater Core

1

Heater Core Inlet/Outlet Pipe Bolts

M8 x 1.25
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Torque value is the midpoint of the provided range (12-15 ft-lbs).

Hvac Controls

1

HVAC Control Panel Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Torque value is the midpoint of the provided range (7-9 ft-lbs).

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Torque value is the midpoint of the provided range (12-15 ft-lbs).

Suspension

Torque specifications for Suspension

Front Suspension

1

Control Arm Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on general industry standards.
2

Ball Joint Nut

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
3

Steering Knuckle Bolts

M18 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on general industry standards.

Rear Suspension

1

Upper Control Arm Bushing Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on general industry standards.
2

Lower Control Arm Bolts

M14 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on general industry standards.
3

Coil Spring Mounting Bolts

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.

Steering System

1

Tie Rod End Nut

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2

Sway Bar Link Nut

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)

Strut/Shock Absorber Mounting

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
52 ft-lbs (71 N·m)

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the lug nuts on a 2003-2004 Infiniti m45?

According to the manufacturer's specifications, the torque for the lug nuts IS 80 ft-lbs (108 Nm).

Q2

Can I use an impact wrench to tighten the lug nuts on my m45?

Yes, you can use an impact wrench, but it's crucial to set it to the correct torque specification to avoid overtightening or undertightening the lug nuts. Ensure that your impact wrench IS calibrated to deliver 80 ft-lbs (108 Nm) of torque.

Q3

How often should I check the torque on the lug nuts of my m45?

It's recommended to inspect and re-torque the lug nuts regularly, especially after installing new tires or wheels. This helps ensure that they remain securely tightened and prevent potential issues such as wheel wobble or loosening.

Q4

What IS the torque specification for the oil drain plug on a 2003-2004 Infiniti m45?

The oil drain plug on your m45 should be tightened to 18 ft-lbs (24 Nm).

Q5

What torque should I use when replacing the spark plugs on my m45?

The recommended torque for the spark plugs in a 2003-2004 Infiniti m45 IS 15 ft-lbs (20 Nm).

Q6

How do I properly torque the bolts on my m45's suspension components?

The torque specifications for suspension bolts vary depending on the specific component. Refer to the Infiniti service manual for the exact torque values for each suspension component.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the m45.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Tightening Engine Components

Technical procedure for tightening engine components on the 2003-2004 Infiniti m45.

  • Locate the component to be tightened.
  • Refer to the torque specifications table for the appropriate torque value.
  • Set the torque wrench to the desired torque value.
  • Tighten the fastener until the torque wrench clicks.
  • Double-check the tightness of the fastener to ensure it IS secure.
  • Safety Note: Always wear gloves and safety glasses when working on your vehicle.
View full procedure

Tightening Suspension Components

Technical procedure for tightening suspension components on the 2003-2004 Infiniti m45.

  • Locate the component to be tightened.
  • Refer to the torque specifications table for the appropriate torque value.
  • Set the torque wrench to the desired torque value.
  • Tighten the fastener until the torque wrench clicks.
  • Double-check the tightness of the fastener to ensure it IS secure.
  • Safety Note: Always use a jack and jack stands to support your vehicle when working on the suspension.
View full procedure
Technical Service Bulletins

Bolt Torque Specifications for 2003-2004 Infiniti m45

2022-05-25

Detailed bulletin providing updated bolt torque specifications for the 2003-2004 Infiniti m45.

2003-2004 m45

Resolution: Refer to the attached torque specifications table for the updated values. Use these values when tightening bolts on your m45 to ensure proper assembly and prevent damage.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Infiniti Specs. All rights reserved.

Privacy Policy Terms of Service