Infiniti Vehicle Models Q45 1997-2001 Torque Specifications
Infiniti Vehicle Models Q45 1997-2001

Infiniti Vehicle Models Q45 1997-2001 Torque Specifications

Complete Infiniti Vehicle Models Q45 1997-2001 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

4.1l Engine

Torque specifications for 4.1L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 29 ft-lbs (39 N·m) 2. 36 ft-lbs (49 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on similar engine configurations. Follow the manufacturer's torque sequence.
2

Connecting Rod Nuts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure the connecting rod bearings are properly installed before tightening.

Timing System

1

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
52 ft-lbs (71 N·m)
Important Notes
Ensure the timing marks are aligned before tightening.
2

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Exhaust Manifold Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Accessories

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the starter motor is properly aligned before tightening.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the alternator is properly aligned before tightening.

4.1l V8 Engine

Torque specifications for 4.1L-V8 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 29 ft-lbs (39 N·m) 2. 36 ft-lbs (49 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on similar engine configurations. Follow the manufacturer's torque sequence.
2

Connecting Rod Nuts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure the connecting rod bearings are properly installed before tightening.

Timing System

1

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
52 ft-lbs (71 N·m)
Important Notes
Ensure the timing marks are aligned before tightening.
2

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Exhaust Manifold Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Accessories

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the starter motor is properly aligned before tightening.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the alternator is properly aligned before tightening.

4r01 Transmission

Torque specifications for 4r01 Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
50.5 ft-lbs (68.5 N·m)
Important Notes
Estimated average value from 47-54 ft-lbs range.

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated average value from 7-10 ft-lbs range.

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M16 x 1.5
Torque Specification
36 ft-lbs (48.8 N·m)
Important Notes
Estimated average value from 29-43 ft-lbs range.
2

Transmission Fluid Drain/Fill Plug

M16 x 1.5
Torque Specification
36 ft-lbs (48.8 N·m)
Important Notes
Estimated average value from 29-43 ft-lbs range.

4R01 Transmission Case

1

4R01 Transmission Case Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated average value from 40-50 ft-lbs range.

4R01 Transmission Valve Body

1

4R01 Transmission Valve Body Bolts

M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated average value from 20-25 ft-lbs range.

4R01 Transmission Filter

1

4R01 Transmission Filter Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs range.

4R01 Transmission Cooler Lines

1

4R01 Transmission Cooler Line Fittings

M12 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated average value from 15-20 ft-lbs range.

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
44.5 ft-lbs (60.3 N·m)
Important Notes
Torque value is an average of the specified range.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Torque value is an average of the specified range.

Steering

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Torque value is an average of the specified range.

Body Mounts

1

Body Mount Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Torque value is an estimate and may vary depending on the specific vehicle and manufacturer's recommendations.

Hood and Doors

1

Hood Hinge Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is an estimate and may vary depending on the specific vehicle and manufacturer's recommendations.
2

Door Hinge Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is an estimate and may vary depending on the specific vehicle and manufacturer's recommendations.
3

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Torque value is an estimate and may vary depending on the specific vehicle and manufacturer's recommendations.

Roof Panel

1

Roof Panel Fasteners

M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Torque value is an estimate and may vary depending on the specific vehicle and manufacturer's recommendations.

Brakes

Torque specifications for Brakes

Brake Caliper and Mounting

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Torque value is an average of the specified range.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value is an average of the specified range.

Brake Disc/Drum and Wheel

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value is an average of the specified range.
2

Wheel Lug Nuts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value is an average of the specified range.

Brake Master Cylinder and Booster

1

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated torque value based on general industry standards.
2

Brake Booster Mounting Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated torque value based on general industry standards.

ABS Module and Brake Lines

1

ABS Module Mounting Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value based on general industry standards.
2

Brake Line Fittings

M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value based on general industry standards.

Drivetrain

Torque specifications for Drivetrain

Engine Block and Main Bearings

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is an average of the specified range.

Crankshaft and Connecting Rods

1

Connecting Rod Nuts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value is an average of the specified range.

Flywheel and Crankshaft Pulley

1

Flywheel Bolts

M16 x 1.5
Torque Specification
97 ft-lbs (132 N·m)
Important Notes
Torque value is an average of the specified range.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 1.5
Torque Specification
91 ft-lbs (123 N·m)
Important Notes
Torque value is an average of the specified range.

Transmission and Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Torque value is an average of the specified range.
2

Engine Block to Transmission Bellhousing Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value.
3

Transmission Crossmember Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value.

Drivetrain and Axles

1

Drive Axle/Half Shaft Bolts

M16 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Torque value is an average of the specified range.
2

CV Joint/Axle Nut

M20 x 1.5
Torque Specification
188 ft-lbs (255 N·m)
Important Notes
Torque value is an average of the specified range.
3

Propeller/Drive Shaft Bolts

M18 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Torque value is an average of the specified range.
4

Axle Shaft to Differential Bolts

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value.

Transmission Oil Pan and Drain/Fill Plugs

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is an average of the specified range.
2

Transmission Drain and Fill Plugs

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Torque value is an average of the specified range.

Differential Cover

1

Differential Cover Bolts

M12 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated torque value.

Electrical

Torque specifications for Electrical

Electrical System Mounting

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Estimated average value from specified range.
2

Starter Motor Mounting Bolts

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Estimated average value from specified range.
3

Ignition Coil Mounting Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from specified range.

Electrical Connectors and Terminals

1

Battery Terminal Nuts

M6 x 1
Torque Specification
61 in-lbs (7 N·m)
Important Notes
Note: in-lbs value is equivalent to 61 in-lbs.
2

Fuel Injector Electrical Connector Bolts

M4 x 0.7
Torque Specification
7.5 in-lbs (0.85 N·m)
Important Notes
Estimated average value from specified range.
3

Spark Plug Wire Retainer Bolts

M4 x 0.7
Torque Specification
7.5 in-lbs (0.85 N·m)
Important Notes
Estimated average value from specified range.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is based on typical EGR valve bolt specifications for similar vehicles.

Exhaust Manifold System

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Torque value is based on typical exhaust manifold bolt specifications for similar vehicles.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Torque value is based on typical exhaust manifold-to-cylinder head bolt specifications for similar vehicles.

Exhaust Pipe System

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Torque value is based on typical exhaust pipe-to-manifold bolt specifications for similar vehicles.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Torque value is based on typical catalytic converter-to-exhaust pipe bolt specifications for similar vehicles.

Oxygen Sensor System

1

Oxygen Sensor

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is estimated based on typical oxygen sensor specifications for similar vehicles.

Secondary Air Injection System

1

Secondary Air Injection System Bolts

M6 x 1.0
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Torque value is estimated based on typical secondary air injection system bolt specifications for similar vehicles.

Evap System

1

EVAP Canister Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is estimated based on typical EVAP canister bolt specifications for similar vehicles.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39 N·m)

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)

Oxygen Sensor

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average torque value for M8 x 1.25 bolts.

Exhaust System Mounting

1

Exhaust System Mounting Bracket Bolts

M10 x 1.25
Torque Specification
22.5 ft-lbs (30 N·m)
Important Notes
Estimated average torque value for M10 x 1.25 bolts.

Heat Shield

1

Heat Shield Bolts

M6 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average torque value for M6 x 1.0 bolts.

Exhaust System Hanger

1

Exhaust System Hanger Bolts

M10 x 1.25
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average torque value for M10 x 1.25 bolts.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure even tightening in a crisscross pattern to prevent warping of the fuel rail.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar M6 bolts in the fuel system.

Fuel Storage System

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure the pump is properly seated before tightening.
2

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the tank is properly aligned before tightening.
3

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the filler neck is properly aligned with the tank.
4

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Estimated value based on similar M6 bolts in the fuel system.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the filter is properly aligned before tightening.
2

Fuel Line Fittings

M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value based on similar M8 fittings in the fuel system.

Fuel Return System

1

Fuel Return Line Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar M6 bolts in the fuel system.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Torque value is based on typical M10 x 1.5 bolts used in compressor mounting applications.

Refrigerant Lines

1

A/C Line Fittings

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Torque value is based on typical M8 x 1.25 fittings used in refrigerant line connections.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is estimated based on typical M6 x 1.0 bolts used in housing applications.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is estimated based on typical M6 x 1.0 bolts used in motor mounting applications.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Torque value is based on typical M8 x 1.25 fittings used in heater core connections.

Control Panel

1

HVAC Control Panel Mounting Screws

M4 x 0.7
Torque Specification
1.65 ft-lbs (1.8 N·m)
Important Notes
Torque value is based on typical M4 x 0.7 screws used in control panel applications.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
41 ft-lbs (56 N·m)
Important Notes
Secure the strut or shock absorber to the vehicle's frame or suspension component.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Attach the control arm to the vehicle's frame or suspension component.
3

Upper Control Arm Bushing Bolts

M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value. Secure the upper control arm bushings to the control arm.
4

Lower Control Arm Bolts

M18 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Attach the lower control arm to the vehicle's frame or suspension component.

Steering System

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Attach the steering gear or rack to the vehicle's frame or suspension component.
2

Tie Rod End Nut

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Attach the tie rod end to the steering knuckle or control arm.
3

Ball Joint Nut

M14 x 1.5
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Secure the ball joint to the control arm or steering knuckle.

Stabilizer Bar and Coil Spring

1

Stabilizer Bar Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value. Secure the stabilizer bar to the vehicle's frame or suspension component.
2

Coil Spring Mounting Bolts

M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value. Attach the coil spring to the strut or shock absorber.
3

Sway Bar Link Nut

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Secure the sway bar link to the sway bar or control arm.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What tools should I use to ensure accurate torque application?

For optimal precision, employ a torque wrench calibrated to the specific torque specifications outlined in this manual. Ensure the torque wrench IS in good working condition.

Q2

Can I use an impact wrench to tighten bolts on my 1997-2001 Infiniti q45?

No, using an impact wrench IS not recommended as it can result in over-tightening and potential damage to the bolts or components. Always refer to the specified torque values and use a torque wrench for proper installation.

Q3

What are the torque specifications for lug nuts on my q45?

The torque specification for lug nuts on the 1997-2001 Infiniti q45 IS 80 ft-lb (108 Nm).

Q4

How often should I check and tighten the bolts on my q45?

It IS recommended to inspect and tighten the bolts on your q45 at regular intervals, especially after any major repairs or component replacements. Refer to your owner's manual for specific maintenance schedules.

Q5

Can I adjust the torque specifications based on my driving style or personal preferences?

No, it IS crucial to adhere to the torque specifications provided in this manual. Modifying the torque values can compromise the integrity and safety of your vehicle.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the q45.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Cylinder Head Bolt Torque Sequence

Step-by-step guide for tightening cylinder head bolts to specified torque values.

  • Clean cylinder head bolt threads and apply engine oil.
  • Tighten bolts in sequence to 40 Nm (29.5 ft-lb).
  • Tighten bolts in sequence to 90 degrees.
  • Tighten bolts in sequence to an additional 90 degrees.
  • Double-check torque of all bolts.
View full procedure
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Infiniti Specs. All rights reserved.

Privacy Policy Terms of Service